No hay artículos en el carro
No hay artículos en el carroMás información del producto
Amplíe el ancho de banda de su red y reduzca los cuellos de botella del tráfico con los switches Multi-Gigabit no gestionados de TRENDnet. Este switch 2.5G con soporte SFP+ viene equipado con puertos RJ-45 de 2.5GBASE-T que proporcionan velocidades gigabit más altas capaces de hasta 2.5Gbps sobre su cableado Cat5e existente o mejor. El switch 2.5G con fibra 10G también ofrece dos puertos 10G SFP+ dedicados para conexiones de red de alta velocidad, proporcionando una solución eficiente y rentable para añadir capacidad de enlace 10G a una red SMB. El diseño sin ventilador reduce el consumo de energía y elimina el ruido de funcionamiento que distrae. Los fiables switches multi-gigabit de TRENDnet son soluciones rentables para aumentar el rendimiento de su red.
Puerto SFP+ 10G
Ofrece dos puertos 10G SFP+ para conexiones de red de alta velocidad que proporcionan una solución eficiente y rentable para añadir capacidad de enlace 10G.
Puertos de 2,5 g
Equipado con cuatro puertos RJ-45 de 2.5GBASE-T que proporcionan velocidades multigigabit capaces de hasta 2.5Gbps sobre el cableado Cat5e existente o mejor.
Sin ventilador
El diseño compacto sin ventilador reduce el consumo de energía y los costes de energía, y elimina el ruido de funcionamiento que distrae.
Interruptor multiconcierto no administrado de 6 puertos
• 4 puertos 2.5GBASE-T
• 2 puertos 10G SFP+
• Cumple con IEEE 802.3bz (2.5G)
• Cumple con IEEE 802.3ae (SFP+)
• Compatible con dispositivos 100/1000BASE-T
• Capacidad de conmutación de 60 Gbps
• Diseño compacto sin ventilador que elimina el ruido
• Montaje en pared para flexibilidad de instalación
• Cumple con NDAA / TAA (solo Estados Unidos y Canadá)
Diseño de carcasa
Carcasa de metal resistente
Montaje en pared
Cuenta con un práctico diseño de montaje en pared para una mayor flexibilidad de instalación
Marco Jumbo
Envía paquetes más grandes, o marcos jumbo (hasta 12 KB) para un mayor rendimiento
Indicadores LED
Los indicadores LED en este interruptor 2.5G con puertos SFP+ transmiten el estado del puerto
Steve
Comentado en los Estados Unidos el 12 de febrero de 2025
Using all 4 ethernet ports and both sfp+ ports. Everything came up immediately. Fast, low power and quiet.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
A very nice, affordable way to upgrade to 10Gbase-SR SFP+ for a couple of hosts. I bought the 10Gtek transceivers, and they worked perfectly.
Washington Irving
Comentado en los Estados Unidos el 25 de abril de 2025
Work great with the cheap 10G fiber modules
Unihiron
Comentado en los Estados Unidos el 26 de agosto de 2024
This device does have better build quality than the other competitors in this price range. I have not opened it up to see how adequate the cooling is, but I would like t put a note out about cooling. If you are going to be using the 10G SFP+ ports, and especially if you are getting the SFP+ to RJ45 Ethernet adapters - i highly suggest you get an external fan for this device. I bought a pair of cheaper competitors for about $45 and I thought they were the reason why my SFP+ to RJ45 were running hot. apparently this is how they are made. to combat this for peace of mind, i currently have a small fan blowing across the switch. For a more elegant solution, I found this and I'll be using this from now on to cool my switch.As far as functionality, it works as expected. I am getting full throughput from the 2.5 and 10g ports. they are able to properly communicate my (now actively) cooled switch in my lab and I enjoy 10gbs speeds to my NAS and in addition to that my two computers in my office will never have to deal with a bottleneck to the rest of my devices in the network thanks to the higher speed capacity of the whole setup. and for those reading this for context:Most of my network is still 1gbs with the exception of my nas that now uses a 10G connection. I have a few devices that would greatly benefit from 10G and are wired to my 2.5g switch and was a pleasant surprise is that if they are running at their full 1G speed, its registering about 2G throughput on the nas through the 10G connection. Basically i fully eliminated the bottleneck from multiple devices wanting data at full speed and communication with the NAS.. so i think it's pretty sweet.TLDR get this if you are going run 10G RJ45 adapters - peace of mind - "120mm 5V USB Powered PC Router Fan"https://www.amazon.com/dp/B0814YW36D?ref=ppx_yo2ov_dt_b_fed_asin_title
CM
Comentado en los Estados Unidos el 4 de diciembre de 2024
This does exactly what it's supposed to do.I had a much more expensive QNAP switch with exact same features, but it died after 2 years of usage. This one does exact same thing for 1/3 of the price. If this product doesn't break after 2 years of usage, I'm going to become a long-term fan. I won't go back to QNAP, that's for sure.
Productos recomendados
Mex $780.00
Mex $ 382 .00 Mex $382.00
Mex $20,405.96
Mex $ 1,881 .00 Mex $1,881.00