Uno de los peores soportes para celular.La parte donde el brazo encaja con la pequeña prensa está hecha de aluminio delgado.Incluso no fue por el peso si no por el movimiento de mover el brazo para alejarlo o acercarlo lo que hizo que se rompiera.No duró ni los 6 meses

Es el segundo q compro en 4 años lo uso bastante , es superpractico

Muy bien armado fácil de usar y práctico

Es muy buen brazo aguanta muy bien una tableta de 12 pulgadas, su soporte es resistente me encanta

Só não é 100% pq o encaixe do braço com a base fixadora é muito mau elaborado. Ao ponto que se apertar a borboleta para fixação o encaixe se deforma completamente. Mas é possível resolver isso colocando uma barra de ferro ou um parafuso por dentro desse pino de encaixe do braço com a base fixadora.

No se pudo cargar el contenido.

No se pudo cargar el contenido.

Way back when I was sent home because of Covid19 (don't start arguing about whether Covid19 exists or not as it doesn't change the story, I was sent home). After about 3 months my employers told me that they were sending a computer so that I could work from home. A laptop was being sent according to my boss.Imagine my horror when a Surface Pro 5 arrived. For those who don't know what that is, it's basically a tablet that has a squishy keyboard attachment. This is not a device that you can use on your lap. I already have a laptop but my work requires a level of security slightly above your average requirement so I'm stuck with the Surface Pro 5, a device that has been superceded by the Surface Pro 6 and the Surface Pro 7.Now I'm a smart man, don't be offended by that, I am and I can prove it. It took me a few days to beg, borrow and steal a desk, chair, keyboard, huge monitor and tangled mass of cables, thus turning the crappy Surface Pro into a desktop computer.I had to put the phone and router on the desk as it was the only place that they could go. I considered getting a mouse (remember them?) but was given a "scratch pad" and I was ready to role play working from home, Zoom meetings wearing just a shirt for example (try it for yourself before you judge me).After a while I hooked up my laptop to the TV next to my desk and my hobby started to take up space in my workplace (I make compilation videos for a popular website with the word "Hub" in it's name).So I'm running out of space and it dawned on me that I should put the Surface Pro behind my monitor to create more space.My monitor is as far back as it can go and there's a two inch gap between the desk and the wall. The Surface Pro fell off the desk, it's a terrible thing to use, it won't stand vertically on it's own and I'm angry with gravity and I turn round to tell my girlfriend exactly that.She's sitting on the sofa with her drawing table in front of her, she's got an art degree and she was doing an illustration for a friend of ours we hadn't seen since before lockdown as the club is closed. It's a private club for like minded people and she was illustrating a scene from when we first met at the private club in town. I remember it well, I took the photo she was rendering on paper and that was the first time I saw her, entering a group of men. Anyway, she was doing a picture for each of our friends who were with her that night, she's very good, most people can't get limbs to overlap but her drawings are always perfect.This was the third drawing she'd done and the answer to my desktop problems was right there all along. Attached to the bookcase behind her was an angel poised lamp, a modern strip light, not the traditional one with a bulb inside. She used it to illuminate the paper from above. She has a different one with a magnifying glass set in a ring of leds for the detailed bits.The simple solution presented itself and after a few minutes online I found this tablet holder. It's the same versatile principle as the lamp but has lockable joints to give stability to the Surface Pro which is a bit heavier than a lamp but it's very stable and I've managed to get the Pro out of the way, thus releasing a bit of space on my desk.I may buy a second one with a camera attachment to go in the bedroom as I could position it on one of these holders very easily. Congratulations to the person who thought of making this, I can think of many more ways to use it.

pensavo fosse una robina da niente: invece è super robusto e veramente molto versatile:- la molla reggi-tablet/telefono è facile da aprire ma blocca molto bene il tablet- il morsetto di fissaggio è si di plastica ma molto massiccia e non si deforma anche stringendo forte la vite, cosa che rende possibile fissarlo con tranquillità a qualsiasi piano.- la vite del morsetto è di metallo: fondamentale per stringere bene. La parte di morsa in fondo alla vite ha una base di appoggio molto larga e coperta da una gommina morbida, che evita di intaccare braccioli, tavoli, scaffali, ecc.- la rotazione del braccio rispetto al morsetto può essere bloccata con una apposita vite di serraggio: molto comodo se uno poi vuole pigiare sul touch screen con na mano sola senza che il tablet se ne vada via, oppure se lo si vuole montare su un piano non perfettamente orizzontale.- il morsetto puo essere montato sia su un supporto orizzontale che verticale, ci sono due fori separati per inserire il braccio snodabile.- il braccio si muove bene, le molle sono ben calibrate per tenere il braccio in qualunque posizione lo si metta- lo snodo del reggi-tablet permette di girarlo in ogni posizione (o almeno in ogni posizione io abia voluto metterlo!)- il tutto regge senza problemi un ipad da quasi 1 kg.- unico difetto, probabilmente inevitabile: se avete il sensore di impronte digitali sul retro del telefono, è praticamente impossibile usarlo dopo aver messo il telefono nella morsa, ma non credo ci siano bracci snodati che risolvono questo problema.Considerato infine il prezzo (20€), io ero veramente convinto arrivasse una cosina sdingolante e precaria, mentre è proprio un ottimo prodotto.

Material muy ligero, aparentemente resistente, los resortes funcionan bien. Se puede mover y acomodar de diferentes maneras. Se puede colocar estupendamente bien en escritorios o mesas, no es ideal para colocar en cualquier mueble, ya que por su diseño y tamaño de perilla sujetadora requiere espacio suficiente por debajo por la mariposa prensora. No tengo ningún problema hasta ahora y da la impresión que podría durar funcionando bien al menos un par de años antes de que los resortes pierdan su tensión original. Algo a recalcar es que mientras la estructura es de metal, la pieza que rota orbitalmente es de plástico, lo cual da un poco de desconfianza. Pero todo funciona muy bien, es muy amigable, no es pesado ni duro ni tampoco peligroso de usar.

Ich habe ein 8,4 Zoll Tablet mit ca. 400g Gewicht.  Bisher bin ich mit dieser Halterung zufrieden und macht auf mich eine stabilen Eindruck (bei richtiger Montage nach Anleitung - siehe "2. Nachteil"), wobei ich Diese erst seit 30 Tagen habe (25.05.2019).Um auf der sicheren Seite zu sein habe ich extra eine Halterung gesucht, die mehr verträgt (kompatibel mit iPad Pro 12,9"  631 Gramm).Dadurch erhoffe ich mir mehr langlebigkeit. Bei anderen Rezensionen wurden Halterungen an der Grenze oder sogar über der Grenze benutzt und wurden nach einiger Zeit (aus meiner sicht verständlich) unbrauchbar.Jetzt zu meinem Eindruck zu der Halterung:1. Nachteil: Aufgrund der Länge der Halterung gib es beim Schreiben auf der Bildschirmtastatur kleine Schwingungen.    Abhilfe: Bei kurzen Texten stütze ich das Tablet mit der zweiten Hand.                 Bei längeren Texten nutze ich eine externe Bluetooth-Tastaturbei falscher Montage ohne Anleitung:2. Nachteil: An der Steckverbindung zwischen der Klemmhalterung und dem Haltearm scheint es bei falscher Montage eine schwache Stelle zu geben. ( Es gab eine Beschwerden in einer Bewertung die ich nachvollziehen kann )     Abhilfe: Der Haltearm sollte immer von oben in die Klemmhalterung gesteckt werden und niemals seitlich. Dadurch wird die schwache Stelle nicht belastet.Wer mit diesen Nachteilen und Abhilfen zurecht kommt, für den kann ich diese Halterung empfehlen.In dieser Preisklasse (26€) habe ich für Tables mit 400g meiner Meinung nach nichts besseres gefunden (Stand 23.04.2019). Die Länge des Haltearms war mir auch wichtig. Wer besseres sucht, muss vermutlich mehr ausgeben oder andere Abstriche machen.Für mich überwiegen die Vorteile, weshalb ich die Halterung hoffentlich lange behalte werde.- Vorteil gegenüber Schwanenhals: Gelenke statt biegen von Material -> Materialermüdung         ( Wobei hier Federn sind, die eventuell auch irgendwann ausleihern können.)- Außerdem soll der Schwanenhals bei Berührung sehr nachschwingen.- Diese Halterung kann außerdem problemlos fast horizontal ausgerichtet werden, was bei 75cm bei keiner Schwanenhals- Halterung funktioniert.- Die Federn halten die Position, sodass die Fixierschrauben keine Belastung haben.  Für mich ist das sehr bequem. Bei mir sind die Fixierschrauben immer locker, wodurch ich den Arm der Halterung schnell verstellen kann. Zum Beispiel, wenn ich meine Sitzposition wechsel.Verbesserungsvorschlag:Bei 75cm ist eine vernünftige Kabelführung für das Ladekabel von Vorteil. Deshalb habe ich improvisiert und die Fixierschrauben an den Gelenken passend gedreht und benutze diese als "Kabelführung".

Es bastante estable, sostiene mi iPad Pro de primera generación grande, casi sin problemas. Se nota que no es de uso rudo pero también puedes ver que te puede durar muchísimo mejor que otros brazos articulados difíciles de configurar. Lo utilizo como 2ndo monitor en un iPad de 10 pulgadas con la app DUET y es ESTABLE. Se siente genial poder trabajar en Mac OS X con una tableta gracias a este excelente soporte. Voy a comprar un par más.

This thing is a god send, since it swivels on the base, I can get out of my chair by simply swinging it to the side(for such a SIMPLE function, I had to buy a WHOLE new clamp mount to do this, but it was a function I needed desperately once I figured it out). However, I have not used this product as an overhead bed reader. So I don't know how "well" it would do in such a weird position.Previously, I bought two goosenecks before, the first one was too weak, so when I poke the the screen on my phone, the entire thing would jiggle likea pendulum with no end to the swinging... So I bought my SECOND gooseneck, it was very strong, doesn't wobble, alas, I use the thing attached to my chair like those airplane inflight seat entertainment TVs, you know, the ones you can pull out and swing infront of your chair.... The gooseneck was too stiff, so if I wanted to get out of my chair, I had to take the entire thing off the side...I used it with a normal phone, and I used it with mini netbook, the netbook was 500 grams in weight, the clamp(or the claw) was firm enough to hold the netbook in place, and when i poke the screen, the entire assembly stays very stiff, very satisfied. As a bonus, the entire stand is super lightweight, as in the materials built in it is very light. It's a good thing for my situation. And a bad thing if you use very very heavy tablets.IMO, goosenecks are good only if you want a tablet/phone mounted in a position where, 1. it doesn't directly come in path with the human leaving the computer desk or whatever medium the human was resting in. 2. You don't frequently adjust the device in said position.If you want it to hang over your bed, or your chair, it is highly possible you will have to 1. get out of the bed and hit the tablet directly above your head, or 2. you can't get out of your chair because it's right infront of you blocking your path. You would want this product instead.