Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Underwater Kinetics - Traje de Resina de plástico anticorrosivo de una Pieza

Envío gratis en pedidos superiores a Mex $600.00

Mex $917.00

Mex $ 449 .00 Mex $449.00

En stock
  • Construcción de viga en I de una pieza para mayor resistencia.
  • Resina de plástico no corroe que no se oxida
  • Soporta hasta 20 libras
  • Fabricado con orgullo en los Estados Unidos


When the average hanger just doesn’t cut it, rely on the Super Hanger. We know your gear is often heavy and wet. So, we built the Super Hanger sturdy, with high quality non-corrosive materials. It holds more weight, so your valuable stuff won’t end up on the ground.Underwater Kinetics was the first dive company to provide divers with a series of hangers designed specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.The hanger designed for holding a BC and regulator has been redesinged for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of the BC hanger an inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The "shoulder tips" of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger. In addition the hanger utilizes strong I- beam construction and is non-corroding as well as non-staining.


MarAireTerra
Comentado en los Estados Unidos el 17 de mayo de 2024
Quality is good, but not big enough for large dry suits.
Steve Broyles
Comentado en los Estados Unidos el 23 de marzo de 2022
Very strong and I've had one of these for a decade, with frequent use.... But it's an expensive piece of molded plastic.Still... I'll but again as they work really well
Rockstar
Comentado en los Estados Unidos el 19 de octubre de 2020
I open water swim in colder water year round. I have a collection of 4 wetsuits from Xterra to Xcel that I rotate frequently. These are strong, big enough,and easy to loop over. Plastic perfect when wet. They are about $10 a piece for just a hanger, but wetsuits aren’t cheap, so why cheap out on the hanger? A bad hanger can ruin a wetsuit.
Dan Ervin
Comentado en los Estados Unidos el 12 de enero de 2020
This hanger will hold a hundred pounds. A hundred pounds! We actually used it once as a make up link in two ropes. That said, hang heavy and wet stuff on it without worrying. It travels well in a garment bag, too.
PH
Comentado en los Estados Unidos el 9 de julio de 2018
Durable and holds heavy items well. Dive gear and armored motorcycle jackets. Could be larger at shoulders, for mens large and above, Jackets. Will fit medium or smaller gear fine.
Productos recomendados

Mex $183.00

Mex $ 100 .00 Mex $100.00

4.9
Elegir