No hay artículos en el carro
No hay artículos en el carroVictoriaS
Comentado en el Reino Unido el 26 de enero de 2025
I already had a badge machine, but I couldn't change the dies to make bigger/smaller badges. This enables us to do so, although the die I've bought to go alongside it doesn't seem to fit properly and sticks as you put it in the machine so doesn't glide like the 75mm it comes with.
Luísa Lourenço
Comentado en España el 23 de abril de 2025
Máquina bastante boa e robusta. Necessitou de um pequeno ajuste na parte traseira para que as partes circulares inferiores ficassem paralelas às partes superiores. Os pins saem perfeitos a partir do momento que se lhe apanha o jeito.Boa compra.
Alexander A
Comentado en Suecia el 9 de junio de 2024
Initially all buttons failed. After checking troubleshooting videos on youtube the problem was the pins vs, holes alignment in the press tool. Ideally the aligment should be automatically set when sliding right and left, but due to poor precision it rarely works. Thus, at fIrst press make sure the pins DON'T go through the holes (by twisting/rotating the tool by hand), the "cup" must be pressed all the way down until the springs are flattended. On the second press the pins should go through the holes (the cup will go all the way down again until the springs are flattened) Please note that due to the button being rotated between press 1 and 2 the picture and the pin on the back will not be aligned, thus this amount of rotation needs to be considered before the first press.
Derek
Comentado en México el 20 de mayo de 2024
Tiene un sistema que no viene en el instructivo para que funcione bien, heche a perder 2 pines pero pude resolverlo
Eve
Comentado en Alemania el 18 de mayo de 2024
Eine Freundin von mir hat genau diese Buttonmaschine mit einem anderen Durchmesser bestellt und sie ist rund um damit zufrieden. Ich selber habe die Buttonmaschine bei ihr benutzt und diese hat mich überzeugt diese auch zu bestellen.Nur leider kam das Paket an und ich war direkt, wie der Titel schon sagt: irritiert.Anscheinend war das Produkt so lange in der Kiste drin gewesen, dass sich das Styropor auf der Buttonmaschine abgezeichnet hat. Ich hatte überall auf dem Produkt die kleinen weißen Pünktchen darauf. An sich keine Beeinträchtigung, weshalb ich mir erst dabei nichts dachte und habe die mit einem handelsüblichen Schwamm entfernt. Ein Rest Weiß ist bedauerlicherweise dennoch zusehen gewesen; war aber bereit es dennoch zu ignorieren, weil es wie gesagt: Nichts beeinträchtigt und ich nicht so eine bin.Dann kam ich ans zusammenschrauben, und dann habe ich zusätzlich noch eine Stelle entdeckt, an der ein Stück Lack von der schwarzen Bodenplatten abgerieben ist und es sich schon Rost gebildet hat. Habe mich dann erst bei meiner Freundin informiert, ob sie sowas Ähnliches bei ihrem Produkt erlebt hat, aber bei ihr war nichts dergleichen vorgefallen.Ich habe mich von diesem Produkt überzeugen lassen, aufgrund der Qualität und Langlebigkeit und schon beim Auspacken enttäuscht.Zu der Qualität der Buttons selber, die man stanzt, kam ich nicht zu …Außerdem war noch ein Heft beigefügt, mit Bildchen, die man auch als Buttonmotiv verarbeiten konnte. Dieses war sehr wellig, als ich es aus dem Karton herausgeholt hatte, als wäre bei der Lagerung einfach sehr viel schiefgelaufen.Ich hoffe, ich konnte damit zukünftigen Käufern bei der Wahl der Buttonmaschine helfen, ich gucke mich jetzt woanders um.
Henrik S.
Comentado en España el 24 de abril de 2024
It does not wood at all. Waste of money
Productos recomendados