No hay artículos en el carro
No hay artículos en el carroEnrique Scott
Comentado en México el 27 de febrero de 2025
La correa muy corta
Patrick
Comentado en los Estados Unidos el 25 de agosto de 2024
The outer collar with the tabs was a tight fit but it worked after some light filing as others have mentioned. The belt was too tight and probably could have stretched it out but the original was fine so I used that. Do get some grease (Sta-Lube CRC SL3330 Moly-Graph Extreme Pressure Multi-Purpose Lithium Grease) and put it on the plastic gears as well as where the 3 tabs lift up onto the plastic. This will make things more smooth and last longer. After the spin cycle there was a horrendous almost grinding noise. The cause more than likely is your shift actuator. You can find the cheap chinese aftermarket ones here on Amazon but at your own risk. Find a used OEM one. They cost the same and will still outlast the cheap chinese made ones. You can tell the difference because the cheap ones have a sticker whereas the OEM ones have the specs printed directly onto the metal housing. If you dismantle the clutch pulley and it looks good then don't bother replacing it but since your underneath there already you might as well replace it if you want. Hold onto the originals for future use if necessary. This clutch pulley kit appears to be pretty solid and hope it lasts. I'll update if anything doesn't last.
Patrick Cayer
Comentado en Canadá el 10 de junio de 2024
J’ai due limer un peu les dentures pour que l’assemblage soit parfait. Les dentures intérieures étaient un peu serrées. Pour le reste, tout est parfait.
Client d'
Comentado en Canadá el 27 de mayo de 2024
parfait en tout point
Joanne
Comentado en Canadá el 22 de mayo de 2024
Hard to find locally. Less costly than a special order. Installed and ready be used in less than hour. Clothes no longer dripping wet when cycle is finished.
Travis Lab
Comentado en los Estados Unidos el 15 de noviembre de 2024
for the people that say the belt doesn't fit, it fits fine, i used a screwdriver for leverage while someone spun the drum....like putting a tire on a rim. There were slight differences in the toothed gears compared to the OEM one... This one doesn't seem as "Beefy" but its been on and used quite a few times now and it got rid of that terrible grinding noise
Valeria Pringle
Comentado en México el 1 de junio de 2023
vino con piezas rotas
Daniel Cardoso Munive
Comentado en México el 20 de mayo de 2023
Sirve para lavadoras whirpool pero la banda bienestar angosta no le quedaLes recomiendo comprar otra banda
Luis Angel
Comentado en México el 11 de febrero de 2023
Llegó antes de lo esperado y cumple lo que promete
Productos recomendados