No hay artículos en el carro
No hay artículos en el carroWWZMDiB Peltier - Módulo de enfriador (12 V, 40 mm x 40 mm) (1 TEC1-12706+1 disipadores de calor + 1 ventiladores)
John
Comentado en los Estados Unidos el 16 de julio de 2024
Both sides get hot. I rigged a water-cooled version using the heatsink, and was able to get one side to cool. But either a bigger fan or bigger heatsink is needed for anything to cook.
Brayton Fish
Comentado en los Estados Unidos el 4 de junio de 2024
Definitely doesn't have a big enough fan or heatsink. The unit shuts off after about 10 seconds. Very useless unmodified. Would have been 0 stars but im hoping it's not broken, so I can fix the overheating issue.
Mechanical Engineer
Comentado en los Estados Unidos el 17 de junio de 2024
Absolute garbage. Heat sink and fan totally useless.The fan runs on 12 volt and .05 amps (.59 watts).I tested the TEC at varying voltages and currents.Maximum before overheating was 12 volts, 3 amps (32.5 watts), where the cold side got to 103 F, which was much warmer than the ambient air temperature of 82 F. The hot side got to 196 F.At 1 and 2 amp input the best delta T that I saw was 10 F below ambient room temperature.The screws that hold the fan on do not hold the fan on, they screw into nothing.I tried the fan in both directions (blowing towards the hot side and away from the hot side) and it made no difference in the thermal camera temperatures.The cold side is the one without any printing.
Robert Mech
Comentado en los Estados Unidos el 20 de mayo de 2024
Fan is not held securely, blows out instead of in based on picture and doesnt mount well the proper direction (or any direction) Peltier works fine.
Ken Bessler
Comentado en los Estados Unidos el 30 de abril de 2024
These are very inexpensive but the parts are well made. My only issue was the ability of the heatsink/fan combo to help the cooler work. They are too small for the load. I ran them together at 12 v but the cooler soon overheated with a negative delta. I ran the cooler at 6 v and the fan at 12v and was able to hold a delta of 25-30c. They are rated for a delta of 60c and for that you need a much bigger heatsink and fan.Still, for the price I bought three and I don't regret it.
Productos recomendados
Mex $310.00
Mex $ 145 .00 Mex $145.00