No hay artículos en el carro
No hay artículos en el carroLente de iris manual de 6-60 mm. Diseñado para cámara CCD de 1/3 pulgadas y el soporte es tipo CS. Como pieza de repuesto para el sistema de seguridad de la cámara CCTV. Características: Varifocal: 6 ~ 60 mm Apertura: ( F ) 1.6 Formato: 1/3" Ángulo de visión horizontal: 50 ~ 5.7 Distancia mínima del objeto: 20 cm Manual: IRIS, ZOOM , FOCUS Dimensión diámetro: 37 mm x 73 mm Contenido del paquete: 1 x Xenoc 6-60 am 6-Lente CCTV mm
Ramses Chavez
Comentado en México el 26 de marzo de 2025
Muy buena lente a excelente precio, ses ajustó bien a la cámara y permite el acercamiento y enfoque
Mario Parisi
Comentado en Canadá el 10 de junio de 2023
It is this good lens that I was looking for
Tony
Comentado en Canadá el 3 de enero de 2023
I tried this on 3 different cams with numerous spacers and could not get the lens to focus. I tried reaching out to the vendor but did not recieve a reply. Back it went.
H W Haak
Comentado en el Reino Unido el 10 de junio de 2021
Refitted my Reolink RLC-520 with this lens. Easy to install, fits perfectly into the standarised screw slot. You'll need to focus you camera before closing the case (obvs) and the picture is clear and sharp. Perfect to watch over my front garden from the roof of the second floor, covering it well, and by virtue of elimination against the standard 160° lens reduces the number of false alarms.
PJ M
Comentado en los Estados Unidos el 6 de febrero de 2021
I got my cover back on, but it left a little gap around it. Everything still works, including the night mode and IR LEDs and sensors. Easy to focus.UPDATE June 2021:Pro Tip: You do not have to take the whole WyzeCam apart to install this lens! After doing a few of these, I found this super simple way to do it.1) On the front of the cam, you'll notice between the original lens and the black plastic surround, there's a rubber gasket there.2) Insert slotted screw driver between the lens and the black plastic surround. You'll need to push the rubber gasket in. Don't worry, just go slow and steady.3) Pry the black plastic piece off using the original lens as a lever. It'll pop right out.4) Use a pair of pliers to unscrew the original lens. It is glued in, so it will take some force. I've done this a few times and never lost a camera doing it. I did lose a camera by disassembling one, when the ribbon cables frayed, so in my experience, it's safer to keep the cam intact and force the lens to unscrew by breaking the glue with a bit of strength.5) Screw in the new Xenocam lens. If you screw it in until the set screw for the zoom touches the white case, it'll be almost perfect. Depending on the range of view, you might need to remove the first set screw and continue screwing it in.It sounds kind of scary, but it's pretty easy once you gain the confidence to use a little force. The improvement in image quality is amazing. I'm using half a dozen or so right now and loving every minute of it.
James M
Comentado en Canadá el 2 de agosto de 2020
Nice little cctv camera lens fully adjustable.
Productos recomendados
Mex $423.80
Mex $ 207 .00 Mex $207.00
Mex $893.00
Mex $ 428 .00 Mex $428.00
Mex $558.90
Mex $ 285 .00 Mex $285.00
Mex $14,681.86
Mex $ 1,881 .00 Mex $1,881.00
Mex $1,808.51
Mex $ 741 .00 Mex $741.00