No hay artículos en el carro
No hay artículos en el carroUsualSuspect
Comentado en los Estados Unidos el 7 de marzo de 2025
The cable is stiff, but I knew it would be to keep any loss to a minimum, and shield from any rf noise. The cable works as designed, and while stiff, gets the job done.
elbert hughes
Comentado en los Estados Unidos el 19 de abril de 2025
Works great
AJ Tissier
Comentado en los Estados Unidos el 1 de diciembre de 2024
I have modified my T-Mobile 5G home internet router to accept SMA antenna connectors for an exterior antenna. I had previously used some longer and inexpensive RG-58 cables with my installation and had some issues pulling the higher frequencies for 5G. I relocated the antenna and modem to utilize better quality and shorter cables. My signal levels have not dramatically increased, however my connections are much more stable and I am more frequently running on the higher frequencies for 5G! That's a win in my book. I originally bought 3 foot cables and could just barely make them work, but I wanted a little more slack and returned them for 6 foot cables.The cables that I received had nicely terminated cabling and I have no complaints.I plan to purchase more of these cables for installations in the future for any frequencies above VHF/UHF ham frequencies. Going to be installing some Meshtastic antennas soon, and plan to use some of this cabling.
Grzegorz Lojko
Comentado en Canadá el 8 de noviembre de 2024
Product delivered on time, neatly and aesthetically packed, good quality, everything works as it should, so far I have no problems.
James B
Comentado en Canadá el 21 de octubre de 2024
This cable appears to be very well built and is quite stout. If you are looking for a no-compromise cable to connect between an SMA-female device and an N-female antenna (or vice-versa) then you will be happy with this purchase.Not being familiar with KMR400 but having familiarity with the higher-spec LMR400, I did some brief research and concluded that this will definitely suit my needs considering the length of the cable (3') and the frequency of interest (915MHz).When I bring my Meshtastic node in for servicing, I will test the insertion loss of this cable to give a sense of what its characteristics are in real life. I do not anticipate a measurable loss considering the ratio between cable length and the measurement error of my Rigol DSA815-TG spectrum analyzer.
Productos recomendados