No hay artículos en el carro
No hay artículos en el carro
Especificaciones:
Calidad del material: cable de silicona/cable de cobre 10AWG
Diámetro exterior del cable: 5,5 mm.
Longitud de cable: 50 cm.
Velocidad de trabajo: 600W
Corriente: 60 A.
Voltaje: 12-36 V.
Conector: EC5 hembra
Terminal O:
Diámetro interior: 8 mm.
Diámetro exterior: 14 mm.
El paquete incluye:
1 cable de terminal EC5 a junta tórica.
Nota:
1. Cuando está en uso, el rojo está conectado al electrodo positivo de la batería, y el negro está conectado al electrodo negativo de la batería.
2. Asegúrate de que el puerto azul del clip de la batería esté en buen contacto con el ordenador host.
3. El encendido continuo no es posible, y el intervalo entre cada arranque es de más de 30 segundos.
4. Retira el terminal en 30 segundos después de arrancar el coche.
5,24 meses de garantía.
My Self
Comentado en los Estados Unidos el 7 de octubre de 2024
connected to the battery under the seat on a motorcycle that has frequent issues starting after a brief stop when the bike is hot. instead of needing to remove the seat to access the battery for a jump, now the connector can be plugged directly to a portable power pack and jumped easily. this is much more convenient. has worked well several times already.
M. Schroeder
Comentado en los Estados Unidos el 28 de enero de 2024
I use mine to jump start my motorcycle when the battery inevitably goes flat. It can take a jump from an emergency pack with no problem and the leads are long enough to route underneath the seat. Wires are thick and the sheath is nice and pliable. I'm going to fashion an adapter so I can use it with a trickle charger, too.
Albuquerque hiker
Comentado en los Estados Unidos el 21 de enero de 2024
I took some pictures of the Nuofany cable I received, including some closeup shots and some where it is easy to be able to read the printing on the wires.EC5 connectors are less common than some other sorts of connectors because they're comparatively expensive but they can handle a lot of current so they are commonly used for the connection between a small lithium 'jump starter' battery pack and its very short cables with alligator clips, so this cable can be used to directly connect a 'jump starter' battery bank to an auto battery without needing to use the alligator clips, although it is worth noting that sometimes those very short cables also have some protective electronics that this cable does not have, such as reverse polarity protection.The wires are very flexible and supple so they seem to be good wire with good insulation. It is among the most flexible cables I've handled, especially for 10AWG (see the last 2 pictures of it bent and tightly coiled). The black and red wires are not joined along their lengths (which seems common for 10AWG wires) but they are held together nicely by a clear wrap at about the middle of the length which does help in managing them. The white printing on both the black and red wires reads only "10AWG 200°C" repeatedly along their lengths, which is good information but I'd prefer to see more.This EC5 to ring terminal cable allows me to quickly and conveniently connect a jump starter battery bank directly to the battery of an automobile without needing to use the 'alligator clamps' that come with the jump starter bank (which usually have a female EC5 connector on one end, just like this cable).
George I.
Comentado en los Estados Unidos el 12 de octubre de 2022
Use at your own risk, I ended up splicing a fuse holder
Productos recomendados
Mex $1,819.00
Mex $ 782 .00 Mex $782.00