No hay artículos en el carro
No hay artículos en el carroDoel-Fin es el hidrófilo original desarrollado por un ingeniero aeronáutico para mejorar el rendimiento general en todos los barcos con motores fuera de borda o unidades outdrive. Moldeado en dos piezas de plástico irrompible garantizado, de alta resistencia, cada lámina está diseñada para flexionar de forma no empotrado para absorber los golpes. Los efectos positivos incluyen una mayor estabilidad, un cepillado consistente a menos revoluciones, un rendimiento más rápido fuera del agujero, un mejor kilometraje de gas, giros más estables, velocidades superiores y un menor aumento de arco a todas las velocidades. Doel-Fin está diseñado para su uso con motores pequeños, grandes motores y botes inflables.
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Hsyn
Comentado en Turquía el 3 de junio de 2024
Artık teknem daha stabil daha az yakıt sarfiyatlı
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Dragonfly
Comentado en Canadá el 9 de septiembre de 2024
These fins are the best invention for marine engines! They should just be standard on them all. We have a set on the inboard in our bowrider and bought this set for the 25HP Mercury outboard and they are great. I recommend getting a set to everyone and many friends have purchased these on my recommendation and all have been pleased with the change in performance.
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Kerryman
Comentado en el Reino Unido el 4 de octubre de 2023
This makes such a huge difference to boat performance, easy to install, it keeps the nose down and the boat planes really well at lower speeds it also stabilises the boat at speed
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Lee Nielsen
Comentado en Australia el 26 de octubre de 2021
I bought these but I havent bolted them on still because I dont want to wreck my cavitation plate with drill holes in case it depreciates the value of my donk and the next buyer may not want that, crazy I know. why buy it then? dont know. I might do it still in summer or just sell it with the boat when I get bored with it.
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Alfredo A.
Comentado en México el 14 de septiembre de 2021
Todo muy bien, solo falta me envíen la factura
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
Benjamin. B.
Comentado en los Estados Unidos el 20 de agosto de 2020
Easy installation. Very well worth the money. It does everything exactly what was supposed to do. It reduces the bow of the boat getting a faster response time to plane on top speed, does get a noticeable difference of greater gas consumption reduced to a fuel increase- leading to fewer gas trips. The biggest difference between having this versus not having it is how much more smoothly the ride is on top speed, with very little usage of the trim in addition to the planning.To install it takes less than an hour. Very easy to install yourself. Take it out of the box and place it where it should be, make sure measure twice to drill once. Drill the holes with the fins on it, as it has pre-drilled holes to guide it. Place the nuts and bolts on, tighten it snug, but not to over tighten it.Depends on the make and model lower unit to install it really doesn't take long to get it done. I had to remove the prop on my 140 HP I/O. Looks great and does an amazing job for my boat. Great for water tubers and skier's that appreciate it for a faster out of the hole experience.I highly recommend it. Worth every single penny, does pay for itself.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
pedro garza
Comentado en México el 18 de diciembre de 2019
Se ve muy fuerte y facil de instalar.
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Alan Cota
Comentado en México el 16 de octubre de 2019
Excelente calidad y precio
Productos recomendados
Mex $453.91
Mex $ 236 .00 Mex $236.00
Mex $2,384.52
Mex $ 1,168 .00 Mex $1,168.00
Mex $1,610.37
Mex $ 676 .00 Mex $676.00
Mex $8,623.58
Mex $ 1,881 .00 Mex $1,881.00