Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

DIYhz Verde 40pcs 3P 3 Pin Tornillo Bloque de terminales Conector 3.5 mm Pitch para Arduino 8 A 250 V 51590

Envío gratis en pedidos superiores a Mex $600.00

Mex $272.12

Mex $ 144 .00 Mex $144.00

En stock

Acerca de este artículo

  • Tensión nominal: 300 V
  • Corriente nominal: 10 A
  • Diámetro del alambre: 24 – 18 awg0.75 mm 2
  • impacto Voltaje nominal: 2 kV
  • Las piezas de plástico: PA66.UL94 V-0.


Rendimiento eléctrico
Estándar de referencia: UL IEC
Tensión nominal: 300 V.
Corriente nominal: 10 A.
Diámetro del cable: 24-18AWG0.75mm ²
Voltaje nominal de impacto: 2KV
Conducta mecánica
Temperatura ambiente: -40 ℃ ~ +105 ℃
Longitud de pelado: 4,5-5 mm.
Par de bloqueo máximo: 0,2 Nm (0,8 kg-in) tamaño
Paso: 3.5
Postes: 2P, 3P.
Material y chapado
Piezas de plástico: PA66, UL94V-0
Pines de soldadura: latón, estañado.
Tornillo: M2, acero, chapado Cr3 + zinc de color pasivado.
La empresa se encuentra en:
Caña: bronce fósforo, niquelado


Eli A
Comentado en los Estados Unidos el 11 de enero de 2022
Description reads its rated for 300V 10A; package arrives and specifies 250V 8A (still will fit my need). The spacing is not "arduino"; my experience with arduino aligns with typical/standard PCB/Protoboard; perhaps some off brand or specific arduino model, but not ones I've used. Should return these to get some that work with protoboard ... Cannot fault seller; they were "straight-forward" with the pin spacing; not sure whats going on with the different power ratings and I dont want to pull one of these little things apart to check if the specified materials are correct. moving on with life and giving a 'meh' product rating.
GUADALUPE MALDONADO JR
Comentado en los Estados Unidos el 7 de diciembre de 2021
Not meant for the Arduino
Buongiorno
Comentado en los Estados Unidos el 13 de junio de 2020
Beware! These are very tiny!I expected these terminal blocks would be bigger, the photos tricked me, my fault since the dimensions were given. They are truly too small for my purposes.Also, I hoped that the wire terminals would be spring loaded instead of screwed in. It requires a mini-screw driver and that makes it inconvenient for testing and experimenting, and more suited to semi-permanent screwed down use.
Marc Skwarczynski
Comentado en los Estados Unidos el 29 de junio de 2019
Had to put diagonally on my prototype board because the pin spacing was incorrect. Other than that, good.
Productos recomendados

Mex $213.69

Mex $ 128 .00 Mex $128.00

4.5
Elegir

Mex $843.81

Mex $ 438 .00 Mex $438.00

4.3
Elegir

Mex $520.80

Mex $ 234 .00 Mex $234.00

4.3
Elegir