No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Entorno operativo
Válvula de liberación de aire de conducto
Instrucciones de uso
Hermoso y práctico, de alta eficiencia y ahorro de energía
Adecuado para:
1. Fertilizando verduras, árboles frutales, invernaderos, flores, jardines de té, campos verdes y todo tipo de cultivos en el campo, ahorrando agua y energía, mejorando la calidad de las plantas, mejorando la calidad del producto y manteniendo el equilibrio natural.
2. Sistemas de tuberías industriales, tanques y tanques de agua, dispositivos de bomba dosificadora, dispositivos de circulación de agua.
3/4 pulgadas
PA - Válvula de liberación de aire NPT Interfaz roscada. Instala verticalmente hacia arriba
1,27 cm
PA - Válvula de liberación de aire NPT Interfaz roscada. Instala verticalmente hacia arriba
1 pulgada
PA - Válvula de liberación de aire NPT Interfaz roscada. Instala verticalmente hacia arriba
Válvula de liberación de aire
Instalado en la tubería, cuando el nivel del agua aumenta, ventila y libera automáticamente aire. Hecho de PA (nylon), presión: ≤145 PSI. Resistente y duradero, independientemente del medio ambiente. Adecuado para tuberías industriales, tuberías de drenaje agrícola, la interfaz por la rosca NPT, 1/2, 3/4, 1 pulgada tres tipos de modelos
Válvulas de ventilación-válvulas de aspiradora
La válvula de liberación de aire de CBTLYSK, una ventilación de aire continua automática, no es una ventilación de aire única, que es la diferencia.
Con tubos de hasta 4 pulgadas, puedes utilizar cualquiera de los tres modelos (1/2, 3/4, 1 pulgada), que se pueden instalar con un reductor de tubería, que es fácil y conveniente.
Welles
Comentado en los Estados Unidos el 28 de julio de 2024
I have just installed a large 2 inch water disk filter for our sprinkler system which runs off of irrigation water. Irrigation water needs to be filtered to avoid your sprinkler heads and drip emitters from clogging up. These large filters are used very often, both in residential and in agriculture, and it is recommended to install the filter upside down so maintaining and cleaning the filter is much easier.The problem mounting these filters, or any tank that contains water upside down, is the tank can trap air in the top. This air will continue to build in the top of the tank and push the water down. Eventually the air needs to be bled off so the entire filter surface can come into contact with the water again. You either need to remember to bleed off the air manually with a valve or use an automatic air release valve that works continuously. This is where the CBTLYSK Air Release Valve comes in. This valve will discharge the air automatically and continuously from all kinds of tanks, pipes, canisters, and reducing the gathering of air in the tank.This CBTLYSK Air Release Valve is well built and out of Polyamide which is basically nylon that has a long service life, is corrosion resistance, acid and alkali resistance, rugged, and durable. It can handle pressure up to 145 psi and has an insect screen in the exhaust port to keep it clean. It just needs to be installed at the highest point of the system and orientated vertically since the internal float must be in a vertical position so it can function properly to exhaust the air.I am very pleased with the size, build quality, and continuous bleed function. I made one mistake though when ordering the CBTLYSK Air Release Valve. Even though the valve body is the same, the valve comes in three different NPT thread sizes; 1/2 inch, 3/4 inch, and 1 inch. They look identical except for the thread size. I ordered the 1 inch thread but my tank canister port has 3/4 inch threads. Not a big deal, I will just put in a small PVC pipe adapter. Selecting the different thread size is not a pull down option on the Amazon CBTLYSK Air Release Valve page, each size is a different CBTLYSK listing. It is just good to pay attention to the thread size you are ordering on Amazon.Good, rugged, air release valve at a good price
Rob H.
Comentado en los Estados Unidos el 28 de julio de 2024
Great product, very well made.Listing is misleading, you only receive one.
BS
Comentado en los Estados Unidos el 10 de julio de 2024
I got this to vent a 55-gallon drum I use for gasoline. It installed easily into the 3/4" center hole of the buttress bung cap. So far, it's working great. We'll see how it stands up over time as I don't think this is the intended purpose.
David S.
Comentado en los Estados Unidos el 19 de junio de 2024
The CBTLYSK 1/2 inch Air Release Valve with NPT Thread Connection has proven to be a valuable addition to my rain barrel setup, especially in the southern regions where mosquitoes are a constant concern. This valve effectively seals the barrels, preventing mosquito entry, while allowing continuous air venting as needed.So far, the valve has performed well, keeping the mosquitoes at bay and maintaining proper air flow out of the barrels. Its sturdy construction suggests it will hold up well in agricultural and industrial applications as well.Overall, this air release valve is a practical and effective solution for managing air flow in water tanks and rain barrels, while also providing protection against pests. Highly recommended for anyone dealing with similar issues.
W. Jones
Comentado en los Estados Unidos el 28 de octubre de 2024
Needed a vent that would release the air as I filled two barrels with emergency drinking water without spilling water all over when filled. Worked fine, allowing the air to escape as the two barrels filled. Once full, this valve stopped the water flow, keeping the garage dry.
Productos recomendados
Mex $218.53
Mex $ 113 .00 Mex $113.00
Mex $1,150.00
Mex $ 460 .00 Mex $460.00
Mex $351.12
Mex $ 182 .00 Mex $182.00
Mex $3,202.30
Mex $ 1,376 .00 Mex $1,376.00
Mex $319.00
Mex $ 175 .00 Mex $175.00
Mex $425.99
Mex $ 204 .00 Mex $204.00